Contractors get 15% off on every order
Showing 1–20 of 24 results
The 316 Stainless Steel Top-Mount Square Post for Cable Railing – 42″ for Flat Areas from West Railings are top-mounted posts designed specifically for a code-compliant height to install over flat areas (42″). They are pre-drilled with twelve holes so cable and tensioners can be easily attached.
The 316 Stainless Steel Top-Mount Square Post for Cable Railing – 36″ for Stairs from West Railings is the core of the modern cable railing system installation. These top-mounted posts are designed so the handrail on top will be at the specific code-compliant height range for stairs (34″ to 38″ measured from the nose of the step). Pre-drilled with ten holes so cable and tensioners are easily attached.
The 316 Stainless Steel 1-1/2″ Diameter Round Rail – 16.4 ft. from West Railings is our go-to option for rails. The round option is easier on the hand, and will allow a greater number of options regarding connections and angles.
The 316 Stainless Steel 1.57″ x 1.57″ Square Rail – 16.4 ft. from West Railings is a squared with a very modern look, and allows many options regarding connections and angles.
The 316 Stainless Steel 2-3/8″ x 13/16″ Rectangular ‘Flat’ Rail – 16.4 ft. from West Railings is our premium option for rails. This “œflat” has a very modern look and allows many possibilities for connections and angles.
The Aluminum 2″ x 1″ Rectangular Aluminum Rail – Powder-coated in Black – 20 ft. from West Railings is our most affordable option for rails. This rail can is only compatible with aluminum posts and aluminum hardware. It has a very modern look and already comes powder-coated in black.
The 316 Stainless Steel Tensioner for Cable Railing – Compatible with 5/32″ Cable – for Flat Areas – One Pair from West Railings is the fitting needed to attach cables to a post on a cable guardrail system for a leveled area.
The 316 Stainless Steel Tensioner for Cable Railing – Compatible with 5/32″ Cable – for Stairs – One Pair from West Railings is the fitting need to attach cables to a post on a cable guardrail system for an angled area (stairs).
The 316 Stainless Steel Tensioner for Cable Railing – Compatible with 1/8″ Cable – for Stairs – One Pair from West Railings is the fitting need to attach cables to a post on a cable guardrail system for an angled area (stairs).
The 316 Stainless Steel Tensioner for Cable Railing – Compatible with 1/8″ Cable – for Flat Areas – One Pair from West Railings is the fitting needed to attach cables to a post on a cable guardrail system for a leveled area.
The 316 Stainless Steel End Cap for 1-1/2″ Diameter Round Rail from West Railings is the accessory needed to cap the end of the handrail after the installation is completed.
The 316 Stainless Steel Corner or 90° Connector for 1-1/2″ Diameter Round Rail from West Railings is the connector needed to connect two runs of round handrails together on a 90-degree angle.
The 316 Stainless Steel End Flange for 1-1/2″ Diameter Round Rail from West Railings is the accessory needed to connect the round rail to a perpendicular wall for extra support.
The 316 Stainless Steel End Cap for 1-1/2″ x 1-1/2″ Square Rail from West Railings is the accessory needed to cap the end of the rail after the installation is completed.
The 316 Stainless Steel Mid or or 180° Connector for 1-1/2″ x 1-1/2″ Square Rail from West Railings is the connector needed to connect two runs of square rails together on a straight continuation. Usually needed for areas longer than 16.4″™ (maximum length of the 316 Stainless Steel 1-1/2″ x 1-1/2″ Square Rail).
The 316 Stainless Steel Corner or 90° Connector for 1-1/2″ x 1-1/2″ Square Rail from West Railings is the connector needed to connect two runs of square rails together on a 90-degree angle.
The 316 Stainless Steel Adjustable Connector for 1-1/2″ x 1-1/2″ Square Rail from West Railings is the connector needed to connect two runs of square rails together on a specific angle (lower than 90 degrees).
The 316 Stainless Steel End Flange for 1-1/2″ x 1-1/2″ Square Rail from West Railings is the accessory needed to connect the square rail to a perpendicular wall for extra support.
The 316 Stainless Steel End Cap for 2-3/8″ x 13/16″ Rectangular ‘Flat’ Rail from Q-railing is the accessory needed to cap the end of the rail after the installation is completed.
The 316 Stainless Steel Mid or or 180° Connector for 2-3/8″ x 13/16″ Rectangular ‘Flat’ Rail from Q-railing is the connector needed to connect two runs of rectangular “flat”rails together on a straight continuation. Usually for areas longer than 16.4″™ (maximum length of the 316 Stainless Steel 2-3/8″ x 13/16” Rectangular ‘Flat’ Rail).
End of content
End of content
Be the first to know about our new arrivals, exclusive offers and the latest updates.
By subscribing, you agree to our privacy policy.
We have something special for you
Use above code to get 5% off for your first order when checkout. Don't miss it.
316 Stainless Steel Wall-to-Glass or Square Post-to-Glass Clamp for Glass Railing - Model B
$39
316 Stainless Steel 2" Diameter Round Standoff Pin for Side-Mount or Fascia-Mount Glass Railing - Black
$49
Anodized Aluminum Corner Piece for Top-Mount Slim Base Shoe Track for Glass Railing - Outward Corner
$195
Anodized Aluminum Corner Piece for Top-Mount Slim Base Shoe Track for Glass Railing - Inward Corner
$195
2205 Duplex Stainless Steel Side-Mount or Fascia-Mount Glass Clamp for Glass Railing - Smart Spigot
$99
2205 Duplex Stainless Steel Top-Mount Glass Clamp for Glass Railing - Spigot - Black
In order to provide you a personalized shopping experience, our site uses cookies. By continuing to use this site, you are agreeing to our cookie policy.
No products in the cart.
