Contractors get 15% off on every order
Showing 41–60 of 87 results
The 316 Stainless Steel End Cap for 1.67″ x 1.67″ Square Top Cap Rail for Glass Railing from West Railings is the accessory needed to cap the end of the square top cap rail after the installation is completed.
The 316 Stainless Steel Adjustable Connector HORIZONTAL for 1.67″ x 1.67″ Square Top Cap Rail for Glass Railing is an EXCLUSIVE product from West Railings. This is the connector needed to connect two runs of square top cap rails together on any angle (0 to 89 degrees) on a horizontal axis. Most common for balconies and areas where there are different shapes other than 90-degree corners.
The 316 Stainless Steel 90°-Down Connector for 1.67″ x 1.67″ Square Top Cap Rail for Glass Railing from West Railings is the connector needed to connect two runs of square top cap rails together on a 90-degree angle. As well as on a vertical axis when the top cap rail attached is on the vertical edge of the panel. One common situation where this connector is needed is to connect a top cap rail from a staircase to a landing on the same line. The discrepancy of height (34″-38″ on the stairs to at least 42″ on the landing) will require this connector plus a 316 Stainless Steel Adjustable Connector UP for 1.67″ x 1.67″ Square Top Cap Rail for Glass Railing (sold separately).
The 316 Stainless Steel Corner or 90° Connector for 1.67″ x 1.67″ Square Top Cap Rail for Glass Railing from West Railings is the connector needed to connect two runs of square top cap rails together on a 90-degree angle (corner).
The 316 Stainless Steel Mid or or 180° Connector for 1.67″ x 1.67″ Square Top Cap Rail for Glass Railing from West Railings is the connector needed to connect two runs of square top cap rails together on a straight continuation. Usually needed for areas longer than 16.4″™ (maximum length of the 316 Stainless Steel 1.67″ x 1.67″ Square Top Cap Rail).
The 316 Stainless Steel Adjustable Connector UP for 1.67″ x 1.67″ Square Top Cap Rail for Glass Railing from West Railings is the connector needed to connect two runs of square top cap rails together on any angle (25 to 55 degrees on a vertical axis going UPWARD). One common situation where this connector is needed is to connect a top cap rail from a staircase to a landing on the same line. The discrepancy of height (34″-38″ on stairs to at least 42″ on the landing) will require this connector plus a 316 Stainless Steel 90°-Down Connector for 1.67″ x 1.67″ Square Top Cap Rail for Glass Railing (sold separately).
The 316 Stainless Steel End Flange for 1.67″ x 1.67″ Square Top Cap Rail for Glass Railing from West Railings is the accessory needed to connect the square top cap rail to a perpendicular wall for extra support.
The 316 Stainless Steel End Cap for 1″ x 3/4″ Rectangular Top Cap Rail for Glass Railing from West Railings is the accessory needed to cap the end of the rectangular top cap rail after the installation is completed.
The 316 Stainless Steel Corner or 90° Connector for 1″ x 3/4″ Rectangular Top Cap Rail for Glass Railing from West Railings is the connector needed to connect two runs of rectangular top cap rails together on a 90-degree angle (corner).
The 316 Stainless Steel Mid or or 180° Connector for 1″ x 3/4″ Rectangular Top Cap Rail for Glass Railing from West Railings is the connector needed to connect two runs of rectangular top cap rails together on a straight continuation. Usually needed for areas longer than 16.4″ (maximum length of the 316 Stainless Steel 1″ x 3/4″ Rectangular Top Cap Rail).
The 316 Stainless Steel Adjustable Connector HORIZONTAL for 1″ x 3/4″ Rectangular Top Cap Rail for Glass Railing from West Railings is the connector needed to connect two runs of rectangular top cap rails together on any angle from 0 to 89 degrees on a horizontal axis. Very popular on balconies and areas where there are angles other than 90-degree corners.
The 316 Stainless Steel Adjustable Connector VERTICAL for 1″ x 3/4″ Rectangular Top Cap Rail for Glass Railing from West Railings is the connector needed to connect two runs of rectangular top cap rails together on any angle. From 0 to 43 degrees on a vertical axis going upward, and 0 to 90 degrees on a vertical axis going downward. One common situation where this connector is needed is to connect a top cap rail from a staircase to a landing on the same line.
The 316 Stainless Steel End Flange for 1″ x 3/4″ Rectangular Top Cap Rail for Glass Railing from West Railings is the accessory needed to connect the rectangular top cap rail to a perpendicular wall for extra support.
The 316 Stainless Steel Tensioner for Cable Railing – Compatible with 5/32″ Cable – for Flat Areas – One Pair from West Railings is the fitting needed to attach cables to a post on a cable guardrail system for a leveled area.
The 316 Stainless Steel Tensioner for Cable Railing – Compatible with 5/32″ Cable – for Stairs – One Pair from West Railings is the fitting need to attach cables to a post on a cable guardrail system for an angled area (stairs).
The 316 Stainless Steel Tensioner for Cable Railing – Compatible with 1/8″ Cable – for Stairs – One Pair from West Railings is the fitting need to attach cables to a post on a cable guardrail system for an angled area (stairs).
The 316 Stainless Steel Tensioner for Cable Railing – Compatible with 1/8″ Cable – for Flat Areas – One Pair from West Railings is the fitting needed to attach cables to a post on a cable guardrail system for a leveled area.
The 316 Stainless Steel End Cap for 1-1/2″ Diameter Round Rail from West Railings is the accessory needed to cap the end of the handrail after the installation is completed.
The 316 Stainless Steel Corner or 90° Connector for 1-1/2″ Diameter Round Rail from West Railings is the connector needed to connect two runs of round handrails together on a 90-degree angle.
The 316 Stainless Steel End Flange for 1-1/2″ Diameter Round Rail from West Railings is the accessory needed to connect the round rail to a perpendicular wall for extra support.
End of content
End of content
Be the first to know about our new arrivals, exclusive offers and the latest updates.
By subscribing, you agree to our privacy policy.
We have something special for you
Use above code to get 5% off for your first order when checkout. Don't miss it.
316 Stainless Steel 2" Diameter Round Standoff Pin for Side-Mount or Fascia-Mount Glass Railing - Black
$49
Anodized Aluminum Corner Piece for Top-Mount Slim Base Shoe Track for Glass Railing - Outward Corner
$195
Anodized Aluminum Corner Piece for Top-Mount Slim Base Shoe Track for Glass Railing - Inward Corner
$195
316 Stainless Steel Side-Mount or Fascia-Mount Glass Clamp for Glass Railing - Smart Spigot
$99
2205 Duplex Stainless Steel Top-Mount Glass Clamp for Glass Railing - Spigot - Black
316 Stainless Steel Glass-to-Glass Straight Clamp for Glass Railing - Model F
$44
In order to provide you a personalized shopping experience, our site uses cookies. By continuing to use this site, you are agreeing to our cookie policy.
Subtotal: $126
316 Stainless Steel Double Standoff Plate for Side-Mount or Fascia-Mount Glass Railing 
